1. المنزل
  2. أجهزة إلكترونية
  3. سماعات
  4. ملحقات سماعات الأذن
إعادة بيع هذا المنتج؟
صور 1/2

واقي الغبار من Elago متوافق مع Apple Airpods 1 & 2 (مجموعتان) حماية كاملة، تركيب سهل ونظيف، طلاء ذهبي عيار 18 قيراط، مثبت واقي من الغبار، مقاوم للصدمات - ذهبي غير لامع

  • العلامة التجاريةElago
  • نموذجEAP-GUARD-MGD-2S
    • أكثر

Color: ماتي الذهب

الضمان

1 Year Warranty
مجانا
  • نظرة عامة
  • مواصفات
  • المراجعات
  • اسأل سؤالا

نظرة عامة

  • INSTALLATION 1) Attach the bottom sticker on the body portion. 2) Place the top sticker upside down on the bottom portion so that the adhesive side faces upwards on the body portion. 3) Close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut. 4) Place your fingers in the AirPods inserts to check if the dust guard is applied properly. If it is not attached properly, it can scratch the AirPods.
  • Did you know? There are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time
  • The guard acts as a buffer between your case and the metallic dust that accumulates over time. The guard can easily be exchanged out if needed.
  • It may be hard and take some time to align the stickers on AirPods, however the elago AirPods Dust Guard is made of metal which can be installed easier and cleaner than any other similar products on the market.
  • The thickness of the plate is 0.04mm. Experience flawless use of the case with the Dust Guard installed.
  • INSTALLATION 1) Attach the bottom sticker by aligning it with the LED indicator light. 2) Place the top sticker upside down on the bottom sticker so that the adhesive side faces upwards on the body portion. 3) Close lid over the upward facing dust guard so that it sticks perfectly to cap once shut.

مواصفات

العلامة التجاريةElago

نموذجEAP-GUARD-MGD-2S

Colorماتي الذهب

وزنكغ 0.12

ارتفاعسم 4

الطولسم 7.50

عرضسم 6

RBINRBI000000008275

تم إنشاؤها علىأكتوبر ٢٥ ٢١

تفاصيل المنتج
  • INSTALLATION 1) Attach the bottom sticker on the body portion. 2) Place the top sticker upside down on the bottom portion so that the adhesive side faces upwards on the body portion. 3) Close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut. 4) Place your fingers in the AirPods inserts to check if the dust guard is applied properly. If it is not attached properly, it can scratch the AirPods.
  • Did you know? There are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time
  • The guard acts as a buffer between your case and the metallic dust that accumulates over time. The guard can easily be exchanged out if needed.
  • It may be hard and take some time to align the stickers on AirPods, however the elago AirPods Dust Guard is made of metal which can be installed easier and cleaner than any other similar products on the market.
  • The thickness of the plate is 0.04mm. Experience flawless use of the case with the Dust Guard installed.
  • INSTALLATION 1) Attach the bottom sticker by aligning it with the LED indicator light. 2) Place the top sticker upside down on the bottom sticker so that the adhesive side faces upwards on the body portion. 3) Close lid over the upward facing dust guard so that it sticks perfectly to cap once shut.

العلامة التجاريةElago

نموذجEAP-GUARD-MGD-2S

Colorماتي الذهب

وزنكغ 0.12

ارتفاعسم 4

الطولسم 7.50

عرضسم 6

RBINRBI000000008275

تم إنشاؤها علىأكتوبر ٢٥ ٢١

المراجعات (0)

في انتظار تعليقاتكم

0.0

  • 5
  • 4
  • 3
  • 2
  • 1
SAR 39.78
مخزون
طريقة الشحن
التسليم القياسي
SAR 32.64
الرسوم المخصصة التقريبيةSAR 3.79

متبقي عنصر واحد

التسليم إلى

احصل عليه مارس ٣

طرق الدفع

بيع بواسطة Nobona

البطاقة فقط

45 يومًا قابلة للإرجاع

توصيل ران بازار

معاملة آمنة

قد تعجبك